Drivers & Fanout Buffers | MC100EP116
Differential Line Receiver / Driver
Active, Not Rec
概览
The MC10EP116/100EP116 is a 6-bit differential line receiver based on the EP16 device. The 3.0GHz bandwidth provided by the high frequency outputs makes the device ideal for buffering of very high speed oscillators.
The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.
The design incorporates two stages of gain, internal to the device, making it an excellent choice for use in high bandwidth amplifier applications.
The differential inputs have internal clamp structures which will force the Q output of a gate in an open input condition to go to a LOW state. Thus, inputs of unused gates can be left open and will not affect the operation of the rest of the device. Note that the input clamp will take affect only if both inputs fall 2.5V below VCC.
The 100 Series contains temperature compensation.
- General Purpose Logic
- Telecommunication Equipment
- 260 ps Typical Propagation Delay
- Maximum Frequency > 3 GHz Typical
- PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
- NECL Mode Operating Range: VCC = 0 V with VEE =-3.0 V to -5.5 V
- Open Input Default State
- Safety Clamp on Inputs
- Q Output will default LOW with inputs open or at VEE
- VBB Output
Buy/Parametrics Table
搜寻
Close Search
产品:
1
分享
排序方式
产品系列:
┗
可订购器件:
1
产品
Active, Not Rec
Pb
A
H
P
LQFP-32
2
260
JTRAY
250
Y
Signal Driver
6
1:1
ECL
ECL
5
0.2
20
0.26
220
3000
~NA~
Price N/A
More Details
Show More
1-25 of 25
Products per page
Jump to :
1
Support on the go
Find and compare products, get support and connect with onsemi sales team.
Contact Sales
