NCP1080: Integrated 13 W PoE-PD & DC-DC Converter Controller (IEEE 802.3af)

Overview
Specifications
Packages
Applications
Datasheet: Power over Ethernet Powered Device (PoE-PD)
Rev. 4 (207.0kB)
»查看材料成分
»No Product Change Notifications exist
产品说明
The NCP1080 is a member of ON Semiconductor's Power over Ethernet Powered Device (PoE-PD) product family and represents a robust, flexible and highly integrated solution targeting demanding Ethernet applications. It combines in a single unit an enhanced PoE-PD interface fully compliant with the IEEE 802.3af specification and a flexible and configurable DC-DC converter controller.
The NCP1080's exceptional capabilities offer new opportunities for the design of products powered directly over Ethernet lines, eliminating the need for local power adapters or power supplies and drastically reducing the overall installation and maintenance cost.
ON Semiconductor's unique manufacturing process and design enhancements allow the NCP1080 to deliver up to 13 W of regulated power to support PoE applications according to the IEEE 802.3af standard. This device leverages the significant cost advantages of PoE-enabled systems to a broad spectrum of products in markets such as VoIP phones, wireless LANs, security cameras, point of sales terminals, RFID readers, industrial Ethernet, etc.
The integrated current mode DC-DC controller facilitates isolated and non-isolated flyback, forward and buck converter topologies. It has all the features necessary for a flexible, robust and highly efficient design including programmable switching frequency, duty cycle up to 80 percent, slope compensation, and soft start up.
The NCP1080 is fabricated in a robust high voltage process and integrates a rugged vertical N-channel DMOS with a low loss current sense technique suitable for the most demanding environments and capable of withstanding harsh environments such as hot swap and cable ESD events.
特性   优势
     
  • Delivers up to 13 W
 
  • Support for traditional PoE apps
  • Full operation to TJ=150C
 
  • Wide operating temperature range
  • Robust 3.0 kV cable ESD protection
 
  • Extended operation in harsh environments
  • Exposed TSSOP-20 EP package
 
  • Thermally enhanced package for higher output current
应用   终端产品
  • Power over Ethernet Powered Device (PoE-PD) interface and Integrated DC-DC converter controller
 
  • VoIP phones
  • WLAN access points
  • Box security cameras
  • Industrial Ethernet HMIs and UPS backed PLCs and IOMs
  • Point of Sales terminals
  • RFID readers
技术信息
应用注释 (1) 封装图纸 (1)
数据表 (1)  
供货情况和样品
产品
状况
无铅
具体说明
封装
MSL*
容器
预算价格 (1千个数量的单价)
类型
引脚
外形
类型
数量
NCP1080DEG Active Integrated PoE-PD & DC-DC Converter Controller (IEEE 802.3af 13 W) TSSOP-20 EP, 6.5x4.4 20 948AB 2 Rail 74 Contact Sales Office
NCP1080DER2G Active Integrated PoE-PD & DC-DC Converter Controller (IEEE 802.3af 13 W) TSSOP-20 EP, 6.5x4.4 20 948AB 2 Tape and Reel 2500 Contact Sales Office
表面贴装器件的潮湿敏感度等级(MSL)(260°C回流温度时测量无铅,235°C回流温度时测量含铅)
VCC Min (V) : 0
Package : TSSOP-20 EP, 6.5x4.4
Control Mode : Current Mode
VCC Max (V) : 57
tres Typ (ns) : 37
VCC Min (V) : 0
fSW Typ (kHz) : 250
VCC Max (V) : 57
IO Max (µA) : 570000
Package : TSSOP-20 EP, 6.5x4.4
Phases : 1
Topology : Multimode
市场订货至交货的时间(周) : Contact Factory
P&S (2010-07-28) : <100
VCC Min (V) : 0
Package : TSSOP-20 EP, 6.5x4.4
Control Mode : Current Mode
VCC Max (V) : 57
tres Typ (ns) : 37
VCC Min (V) : 0
fSW Typ (kHz) : 250
VCC Max (V) : 57
IO Max (µA) : 570000
Package : TSSOP-20 EP, 6.5x4.4
Phases : 1
Topology : Multimode
市场订货至交货的时间(周) : Contact Factory
已选的电气规范

如欲了解全部电气规范,请看 数据表.

标志 边界 价值 单位
Topology typ Multimode
VCC min 0
V
VCC max 57
V
fSW typ 250
kHz
tres typ 37
ns
Phases 1
Mode Current Mode
For complete packaging information, see the datasheet
»查看材料成分
外形
948AB   
封装
For complete product information, see the datasheet
之前浏览的产品
清除列表

Associated Products
  Do you also need MOSFETs?
Do you also need MOSFET / IGBT Drivers?