feedback
评价本网页


需要帮助?


NCP1028LEDGEVB: 720 mA 18 V LED Driver Evaluation Board

评估/开发工具简介
The NCP1028LEDR2GEVB is a universal input ( 90 to 265 Vac) LED Driver designed for constant current applications. This demo board has been configured in an isolated flyback topology with secondary side constant current control. This board has been preconfigured to source a nominal current of 720 mA. The design has open circuit output protection which clamps the output to voltage of 18V. In a universal input flyback configuration, the NCP1028 is limited to approximately 15W. The current and open circuit voltage can be changed by simply changing out a resistor zener combination. The NCP1028 is an integrated fixed frequency current-mode controller with a 5.8 ohm (typ) 700 V MOSFET. It contains all necessary features such as soft start, frequency jittering, skip cycle etc. to build a rugged and low cost power supply.
评估/开发工具信息
产品 状况 Compliance 简短说明 所用产品 行动
NCP1028LEDGEVB Active
Pb-free
720 mA 18 V LED Driver Evaluation Board NCP1028P065G
Avnet (2015-07-09) : 3
Digikey (2015-07-09) : 4
技术文档
类型 文档标题 文档编号/大小 修订号
Eval Board: BOM NCP1028LEDGEVB Bill of Materials ROHS Compliant NCP1028LEDGEVB_BOM_ROHS.PDF - 103.0 KB  1 
Eval Board: Gerber NCP1028LEDGEVB_GERBER.zip NCP1028LEDGEVB_GERBER.ZIP - 71.0 KB  0 
Eval Board: Schematic NCP1028LEDGEVB Schematic NCP1028LEDGEVB_SCHEMATIC.PDF - 135.0 KB  0 
Eval Board: Test Procedure NCP1028LEDGEVB Test Procedure NCP1028LEDGEVB_TEST_PROCEDURE.PDF - 32.0 KB  0 
之前浏览的产品
清除列表