Wired Transceivers & Modems | NCV7381
FlexRay® 收发器，箝位 30
Active, Not Rec
概览
NCV7381 是一款单沟道 FlexRay 收发器，符合 FlexRay Electrical Physical Layer Specification Rev. 3.0.1 规范，能够以高达 10 Mbit/s 的速率进行通信。它在一侧的有线 FlexRay 通信介质和另一侧的协议控制器和主机之间提供差分发射和接收功能。NCV7381 模式控制功能适用于永久性联接汽车电池的节点。它提供卓越的 EMC 和 ESD 性能。
- In Vehicle Networking
- Powertrain
- X-by-Wire
- Safety
- Automobiles
- Compliant with FlexRay Electrical Physical Layer Specification
Rev 3.0.1 - FlexRay Transmitter and Receiver in Normal-power Modes for
Communication up to 10 Mbit/s - Support of 60 ns Bit Time
- FlexRay Low-power Mode Receiver for Remote Wakeup Detection
- Excellent Electromagnetic Susceptibility (EMS) Level over Full
Frequency Range. Very Low Electromagnetic Emissions (EME) - Bus Pins Protected against >10 kV System ESD Pulses
- Safe Behavior under Missing Supply or No Supply Conditions
- Interface Pins for a Protocol Controller and a Host
(TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN) - INH Output for Control of External Regulators
- Local Wakeup Pin WAKE
- TxEN Time-out
- BGE Feedback
- Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:
- VBAT Supply Parametrical Range from 5.5 V to 50 V
- VCC Supply Parametrical Range from 4.75 V to 5.25 V
- VIO Supply Parametrical Range from 2.3 V to 5.25 V - Compatible with 14 V and 28 V Systems
- Operating Ambient Temperature -40C to +125C (TAMB_Class1)
- Junction Temperature Monitoring with Two Levels
- FlexRay Functional Classes
- Bus Driver Voltage Regulator Control
- Bus Driver Bus Guardian Interface
- Bus Driver Logic Level Adaptation
- Bus Driver Remote Wakeup - Automotive Qualification According to AECQ100
产品参数及购买信息
支持服务
联系安森美销售团队获得支持，查询或者对比产品细节。
联系销售
