Wired Transceivers & Modems | NCV7381C

FlexRay® Transceiver, Clamp 30

Active

数据表

购买

概览

NCV7381C is a high−temperature single-channel FlexRay transceiver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side.
NCV7381C mode control functionality is optimized for nodes permanently connected to car battery.
It offers excellent EMC and ESD performance.

  • In Vehicle Networking
  • Powertrain
  • X-by-Wire
  • Safety

  • Automobiles

  • Compliant with FlexRay Electrical Physical Layer Specification
    Rev 3.0.1
  • FlexRay Transmitter and Receiver in Normal-power Modes for
    Communication up to 10 Mbit/s
  • Support of 60 ns Bit Time
  • FlexRay Low-power Mode Receiver for Remote Wakeup Detection
  • Excellent Electromagnetic Susceptibility (EMS) Level over Full
    Frequency Range. Very Low Electromagnetic Emissions (EME)
  • Bus Pins Protected against >10 kV System ESD Pulses
  • Safe Behavior under Missing Supply or No Supply Conditions
  • Interface Pins for a Protocol Controller and a Host
    (TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
  • INH Output for Control of External Regulators
  • Local Wakeup Pin WAKE
  • TxEN Time-out
  • BGE Feedback
  • Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:
    - VBAT Supply Parametrical Range from 5.5 V to 50 V
    - VCC Supply Parametrical Range from 4.75 V to 5.25 V
    - VIO Supply Parametrical Range from 2.3 V to 5.25 V
  • Compatible with 14 V and 28 V Systems
  • Operating Ambient Temperature -40°C to +150°C (TAMB_Class0)
  • Junction Temperature Monitoring with Two Levels
  • Increased Operating Junction Temperature
  • FlexRay Functional Classes
    - Bus Driver Voltage Regulator Control
    - Bus Driver Bus Guardian Interface
    - Bus Driver Logic Level Adaptation
    - Bus Driver Remote Wakeup
  • Automotive Qualification According to AECQ100

Tools and Resources

Product services, tools and other useful resources related to NCV7381C

CAD Model

CAD模型

物质成分

产品更改通知

可靠性数据

Buy/Parametrics Table

搜寻

Close Search

产品:

1

分享

排序方式

产品系列:

┗

可订购器件:

1

产品

状态

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Data Transmission Standard

Data Rate

Number of Drivers

Number of Receivers

VCC Min (V)

VCC Max (V)

tPLH Max (µs)

IO Max (µA)

IIH Max (mA)

Reference Price

NCV7381CDP0R2G

Contact Sales

Active

CAD Model

Pb

A

H

P

SSOP-16

565AE

2

260

REEL

2000

Y

FlexRay

10 Mb/s

1

1

5.5

50

-

-

-

$1.0547

More Details

Show More

1-25 of 25

Products per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with onsemi sales team.

可靠性数据

Die Related Summary Data

Device: NCV7381CDP0R2G

Equivalent to wafer fab process: I3T

产品技术

产品技术

等效器件小时

平均故障间隔时间/平均无故障时间（按小时计算）

FITS

I3T

4

4350769675

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

重新搜寻