Converters | FAN49103
概览
The FAN49103 is a hgh efficiency buck-boost switching mode regulator which accpets input voltages either above or below the regulated output voltage. Using full-bridge architecture with synchronous rectification, the FAN49103 is capable of delivering up to 2.5 A while regulating the output at 3.4 V. The FAN49103 exhibits seamless transition between step-up and step-down modes reducing output disturbaces. The output voltage and operation mode of the regulator can be programmed through an I2C interface.
At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate the device in power-save mode to maintain high efficiency. In PFM mode, the part till exhibits excellent transient response during load steps. At moderate to heavier loads or Forced PWM mode, the regulator switches to PWM fixed-frequency control. While in PWM mode, the regulator operates at a nominal fixed frequency of 1.8 MHz, which allwos for reduced external component values.
- Smart Phones
- Portable Devices with Li-ion Battery
- 2G/3G/4G Power Amplifiers
- NFC Applications
- 24 µA Typical PFM Quiescent Current
- Above 95% Efficeincy
- Total Layout Area = 11.61 mm2
- Input Voltage Range: 2.5 V to 5.5 V
- Maximum Continuous Load Current- 3.0 A at Vout = 3.4 V, Vin = 3.3 V- 2.5 A at Vout = 3.4 V, Vin = 3.0 V- 2.0 A at Vout = 3.4 V, Vin = 2.5 V
- I2C Compatible Interface
- Programmable Output Voltage:- 2.5 V to 2.8 V in 50 mV Steps- 2.8 V to 4.0 V in 25 mV Steps
- 1.8 MHz Fixed-Frequency Operation in PWM Mode
- Automatic / Seamless Step-up and Step-down Mode Transitions
- Forced PWM and Automatic PFM/PWM Mode Selection
- 0.5 µA Typical Shutdown Current
- Low Quiescent Current Pass-Through Mode
- Internal Soft-Start and Output Discharge
- Low Ripple and Excellent Transient Response
- Internally Set, Automatic Safety Protections(UVLO, OTP, SCP, OCP)
产品参数及购买信息
搜寻
Close Search
产品:
3
分享
排序方式
产品系列:
┗
可订购器件:
3
产品
Show More
1-25 of 25
Products per page
Jump to :
1
支持服务
联系安森美销售团队获得支持，查询或者对比产品细节。
联系销售
