I am your friendly
onsemi website assistant and I was built to help you
navigate our website and show
you our useful features. I will
try my best to find what you need!
I am your friendly
onsemi website assistant and I was built to help you
navigate our website and show
you our useful features. I will
try my best to find what you need!
I am your friendly onsemi website assistant and I was built to help you
navigate our website and show you our useful features. I will try my best to find
what you need!
I am your friendly
onsemi website assistant and I was built to help you
navigate our website and show
you our useful features. I will
try my best to find what you need!
I am your friendly onsemi website assistant and I was built to help you
navigate our website and show you our useful features. I will try my best to find
what you need!
The NCP51561 are isolated dual-channel gate drivers with 4.5-A/9-A source and sink peak current respectively. They are designed for fast switching to drive power MOSFETs, and SiC MOSFET power switches. The NCP51561 offers short and matched propagation delays.
Two independent and 5 kVRMS (UL1577 rating) galvanically isolated gate driver channels can be used in any possible configurations of two low side, two high-side switches or a half-bridge driver with programmable dead time. An enable pin shutdown both outputs simultaneously when is set low.
The NCP51561 offers other important protection functions such as independent under-voltage lockout for both gate drivers and enable function.
特性
优势
4.5-A Peak Source, 9-A Peak Sink Output Current Capability
Improve efficiency and allow direct drive of high power switches
Output Supply Voltage from 6.5 V to 30 V with 5-V, 8-V, and 17-V UVLO threshold.
Offer proper protections for both MOSFET's and SiC FET
Propagation Delay Typical 36 ns with 8 ns Max Delay Matching per channel
Very good signal integrity and fit with fast switching speed applications
User Programmable Input Logic for Single or Dual-input modes via ANB
Offer flexibility in design and topologies
Common Mode Transient Immunity CMTI > 200 V/ns
Improved robustness in fast slew rate high voltage and high current switching applications
5 kVRMS Galvanic Isolation from input to each output & 1200 V peak differential voltage between output channels
Provide safety and protection in applications requiring high isolation level
User Programmable Dead-Time
Allow full control of output behavior according to selected topologies
Enable or Disable pin
Increased compatibility
应用
终端产品
Isolated Converters in DC-DC and AC-DC Power Supply