方案
By Technology
公司介绍
The CAT6202 is a 13 V rated 500 mA CMOS low dropout regulator that provides fast response time to load current and line voltage changes in an automotive environment.
CAT6202 features a low RON P-channel pass element with internal control circuitry which prevents reverse current flow should the voltage at VOUT exceed VIN as in the case of the car's battery voltage accidentally being applied to VOUT.
Thermal protection and current limiting circuitry combine to protect the pass device against faults and abuse. Current limiting is user controlled through a single resistor to ground. A fault output (FLT) provides an alert should an over-current event or thermal shutdown occur.
CAT6202 comes on-line gracefully even though it may be driving heavy capacitive loads thanks to built-in soft-start circuitry. Its output is protected against accidental connection to voltages greater than VIN and will not conduct current backwards into its supply.
CAT6202 is available in 8-pad 2 mm x 3 mm TDFN package.
如需购买产品或样品,请先登录您的安森美账号。
搜寻
Close Search
产品:
1
分享
排序方式
产品系列:
┗
可订购器件:
1
产品
Status
CAD Models
Compliance
Package Type
Case Outline
MSL Type
MSL Temp (°C)
Container Type
Container Qty.
ON Target
Output
Polarity
VO (V)
IO Typ (A)
VI Min (V)
VI Max (V)
VDO Typ (V)
Iq Typ (mA)
PSRR (dB)
Noise (µVrms)
Enable
PowerGood
Application
Reference Price
CAT6202VP2-GT3
Pb
A
H
P
TDFN-8
1
260
REEL
3000
N
Single
Positive
Adj
0.5
3.3
13
0.25
0.16
52
-
Yes
Yes
-
Price N/A
More Details
Show More
1-25 of 25
Products per page
Jump to :
Find and compare products, get support and connect with onsemi sales team.
Contact Sales
分享
导出
Rows
Printer Friendly Version
PDF Format
Excel Format
CSV Format
To proceed order you need to accept Terms
可靠性数据
Die Related Summary Data
Device: CAT6202VP2-GT3
Equivalent to wafer fab process: CMOS SUB
产品技术
产品技术
等效器件小时
平均故障间隔时间/平均无故障时间(按小时计算)
FITS
CMOS SUB
2
920154574
More Details
Re-calculate Data
Data is based on the following assumptions.
Note: The temperature and confidence level may be adjusted to your requirements.
Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)