The FPF2266 features 4.5A continuous current for USB charging port application. which offers Over−Voltage Protection (OVP), over current protection (OCP), also NTC block to monitor system temperature. It has low On−resistance of typical 15 m ohms can operate over an input voltage range of 3.6V to 24 V and up to 28V absolute maximum.
The FPF2266 also provides an open-drain output (BATT_SHDN) for system battery disconnect and a bi-directional interface (ALERT/KILL) with SoC, MCU, or other external source (provides temperature fault condition to external source or it can receive system KILL signal to turn OFF internal switch and disconnect battery).
The FPF2266 is available is in a 4x4 balls 0.4 pitch WLCSP package which can operate over -40°C to +125 °C junction temperature range.
搜寻
Close Search
产品:
1
分享
排序方式
产品系列:
┗
可订购器件:
1
产品
状态
CAD Models
Compliance
Package Type
Case Outline
MSL Type
MSL Temp (°C)
Container Type
Container Qty.
ON Target
Over Current - Shutdown (Y/N)
Over Current - Current Source (Y/N)
Current Limit (FIXED/ADJ/NO)
Over Voltage Protection (Y/N)
Reverse Current Blocking (Y/N)
FAULT Signal (Y/N)
PGOOD (Y/N)
UVLO (Y/N)
Rds(on) Typ (mΩ)
Max Current (A)
Output Discharge (Y/N)
IMON Output (Y/N)
Adjustable Slew Rate (Y/N)
Vin Min (V)
Vin Max (V)
Iq (µA)
eFuse / Hot Plug (Y/N)
Input / Output
Product Family
参考价格
Show More
1-25 of 25
Products per page
Jump to :
支持服务
联系安森美销售团队获得支持,查询或者对比产品细节。
联系销售
分享
导出
Rows
Printer Friendly Version
PDF Format
Excel Format
CSV Format
To proceed order you need to accept Terms
可靠性数据
Die Related Summary Data
Device: FPF2266UCX
Equivalent to wafer fab process: BCDe
产品技术
产品技术
等效器件小时
平均故障间隔时间/平均无故障时间(按小时计算)
FITS
BCDe
0
2210974820
More Details
Re-calculate Data
Data is based on the following assumptions.
Note: The temperature and confidence level may be adjusted to your requirements.
Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)