方案
By Technology
NCT72 是一款双沟道数字式温度计和低温/高温警报器,适用于 PC 和热管理系统。它与 NCT1008 可以实现引脚和寄存器兼容,但 NCT72 支持用户将 /ALERT 引脚拉至 1.8V,不会提高器件的 Idd。NCT72 具有串联电阻抑制功能,可从温度结果中自动消除温度监控二极管高达 1.5 kΩ(典型值)的串联电阻,从而滤除噪声。NCT72 有一个可配置的 /ALERT 输出,以及可切换的宽广温度测量范围。NCT72 的远程热二极管温度测量精度为 ±1°C,环境温度测量精度为 ±3°C。温度测量范围默认为 0°C 至 +127°C,与 NCT1008 兼容,但它可以切换为更宽的测量范围 -64°C 至 +191°C。NCT72 通过 2 线串行接口进行通信,符合系统管理总线 (SMBus/I2C) 标准。NCT72 的默认 SMBus/I2C 地址是 0x4C。NCT72D 的 SMBus/I2C 地址是 0x4D。如同一 SMBus/I2C 上使用了一个以上的 NCT72,地址会非常有用。当片上或远程温度超出范围时,/ALERT 输出会发出信号。/THERM 输出是一个比较器输出,可以控制冷却风扇的开关。如果需要,可以将 /ALERT 输出重新配置为次级 /THERM 输出。
搜寻
Close Search
产品:
2
分享
排序方式
产品系列:
┗
可订购器件:
2
产品
状态
CAD Models
Compliance
Package Type
Case Outline
MSL Type
MSL Temp (°C)
Container Type
Container Qty.
ON Target
Sensor Type
Data Transmission Standard
ICC Max (mA)
VCC Min (V)
VCC Max (V)
T Min (°C)
T Max (°C)
Temperature Error (°C)
Reference Price
NCT72CMTR2G
More Details
NCT72DMNR2G
More Details
Show More
1-25 of 25
Products per page
Jump to :
Find and compare products, get support and connect with onsemi sales team.
Contact Sales
分享
导出
Rows
Printer Friendly Version
PDF Format
Excel Format
CSV Format
To proceed order you need to accept Terms
可靠性数据
Die Related Summary Data
Device: NCT72CMTR2G
Equivalent to wafer fab process: CMOS SUB
产品技术
产品技术
等效器件小时
平均故障间隔时间/平均无故障时间(按小时计算)
FITS
CMOS SUB
2
920154574
More Details
Re-calculate Data
Data is based on the following assumptions.
Note: The temperature and confidence level may be adjusted to your requirements.
Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)