方案
By Technology
MM74HCT373八路D型锁存器和MM74HCT374八路D型触发器采用了先进的硅栅极CMOS技术,可以提供低功耗和宽电源范围的固有优势,但是与LS-TTL输入和输出特性以及引脚分配兼容。 3态输出能够驱动15 LS-TTL负载。 保护所有输入端,以免因内部二极管至VCC和地线的静电放电而受到损坏。 当MM74HCT373 LATCH ENABLE(锁存使能)输入为高电平时,Q输出端将要遵照D输入端。 当LATCH ENABLE变为低电平时,D输入端的数据将保留在输出端,直到LATCH ENABLE再次返回高电平。 当高逻辑电平应用于OUTPUT CONTROL(输出控制)输入端时,所有输出端进入高阻抗状态,不管其他输入端存在什么信号,也不管存储元件的状态如何。 MM74HCT374是正边沿触发的触发器。 在CLOCK (CK)输入的正向转换过程中,D输入端的数据(符合设置和保持时间的要求)被传输到Q输出端。 当高逻辑电平应用于OUTPUT CONTROL(输出控制)输入端时,所有输出端进入高阻抗状态,不管其他输入端存在什么信号,也不管存储元件的状态如何。 MM74HCT器件专用于TTL和NMOS组件与标准CMOS器件之间的接口。 这些器件也是LS-TTL器件的直接替代产品,而且可用于降低现有设计的功耗。
如需购买产品或样品,请先登录您的安森美账号。
搜寻
Close Search
产品:
4
分享
排序方式
产品系列:
┗
可订购器件:
4
产品
状态
CAD Models
Compliance
Package Type
Case Outline
MSL Type
MSL Temp (°C)
Container Type
Container Qty.
ON Target
Type
Channels
VCC Min (V)
VCC Max (V)
tpd Max (ns)
IO Max (mA)
Reference Price
MM74HCT374MTC
More Details
MM74HCT374MTCX
More Details
MM74HCT374WM
More Details
MM74HCT374WMX
More Details
Show More
1-25 of 25
Products per page
Jump to :
Find and compare products, get support and connect with onsemi sales team.
Contact Sales
分享
导出
Rows
Printer Friendly Version
PDF Format
Excel Format
CSV Format
To proceed order you need to accept Terms
可靠性数据
Die Related Summary Data
Device: MM74HCT374MTC
Equivalent to wafer fab process: CMOS SUB
产品技术
产品技术
等效器件小时
平均故障间隔时间/平均无故障时间(按小时计算)
FITS
CMOS SUB
2
920154574
More Details
Re-calculate Data
Data is based on the following assumptions.
Note: The temperature and confidence level may be adjusted to your requirements.
Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)