Selected Connectivity Solution
Selected Solution
返回到 Connectivity solution
Power Over Ethernet (PoE)
Universal PoE compatibility standards help ensure that devices are powered efficiently and safely. To keep up with the increasing power demands of new technology, a new universal standard (IEEE 802.bt) was developed that provides up to 100 Watts of power. By solving the power demands challenge, IEEE 802.bt opens the door to a number of higher-power PoE applications including smart lighting and closed-circuit security cameras.
交互式框图
PoE Connected Lighting
ON Semiconductor offers a complete solution for PoE connected lighting with superior PD controllers, hot swap FETs, linear regulators, and wireless MCU embedded in Bluetooth® Low Energy SiPs or Zigbee modules.
Products
NCP1096: Power Over Ethernet(PoE) – Powered Device Interface Controller with integrated hot swap FET, IEEE 802.3bt
Part of ON Semiconductor’s family of IEEE.3bt, IEEE 802.3af, and/or IEEE 802.3at compliant solutions Power over Ethernet Powered Devices (PoE-PD), the NCP1096 supports the development of high power applications including connected lighting and USB Type C.
NCP1095: Power Over Ethernet (PoE)– Powered Device Interface Controller, IEEE 802.3bt
The NCP1095 is a IEEE.3bt, IEEE 802.3af, and/or IEEE 802.3at compliant Power over Ethernet Powered Device (PoE-PD) Interface Controller that enables the development of high-power applications including connected lighting and security cameras.
NCP1566: Highly Integrated Dual-Mode Active Clamp PWM Controller
The NCP1566 is a highly integrated dual-mode active-clamp PWM controller targeting next-generation high-density, high-performance and small to medium power level isolated dc-dc converters for use in telecom and datacom industries.
FDMQ8203: Dual N-Channel and Dual P-Channel PowerTrench MOSFET, GreenBridge Series of High-Efficiency Bridge Rectifiers
This quad mosfet solution provides ten-fold improvement in power dissipation over diode bridge.
FDMQ8205: GreenBridge 2 Series of High-Efficiency Bridge Rectifiers
FDMQ8205 is GreenBridge 2 series of quad MOSFETs for a bridge application so that the input will be insensitive to the polarity of a power source coupled to the device. Many known bridge rectifier circuits can be configured using typical diodes.
FDMC8622: N-Channel Shielded Gate Power Trench MOSFET 100 V, 16 A, 56 mΩ
This N-Channel MOSFET is produced using an advanced Power Trench process that incorporates Shielded Gate technology. This process has been optimized for rDS(on), switching performance and ruggedness.
ESD8004: ESD Protection Array, USB 3.0
The ESD8004 is designed to protect high speed data lines from ESD. Ultra low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines.
NCP1080: Integrated PoE-PD and DC-DC converter controller, 13 W
The NCP1080 is a member of ON Semiconductor's Power over Ethernet Powered Device (PoE-PD) product family and represents a robust, flexible and highly integrated solution targeting demanding Ethernet applications.
NCP1081: Integrated PoE-PD and DC-DC Converter Controller, 40 W
The NCP1081 is a member of ON Semiconductor's high power HIPO™ Power over Ethernet Powered Device (PoE-PD) product family and represents a robust, flexible and highly integrated solution targeting demanding medium and high power Ethernet applications.
NCP1082: Integrated PoE-PD and DC-DC converter controller, 13 W, with auxiliary supply support
The NCP1082 is a member of the Power over Ethernet Powered Device (PoE-PD) product family from ON Semiconductor and represents a robust, flexible and highly integrated solution targeting demanding Ethernet applications.
NCP1083: Integrated PoE-PD and DC-DC Converter Controller, 40 W, with Auxiliary Supply Support
The NCP1083 is a member of the ON Semiconductor high power HIPO™ Power over Ethernet Powered Device (PoE-PD) product family and represents a robust, flexible and highly integrated solution targeting demanding medium and high power Ethernet applications.
NCP1090: Controller, PoE-PD Interface, Integrated
The NCP1090, NCP1091 and NCP1092 are members of ON Semiconductor's high power HIPO™ Power over Ethernet Powered Device (PoE-PD) product family and integrate an IEEE 802.3af PoE-PD interface controller.
NCP1091: Controller, PoE-PD interface, integrated, with programmable UVLO
The NCP1090, NCP1091 and NCP1092 are members of ON Semiconductor's high power HIPO™ Power over Ethernet Powered Device (PoE-PD) product family and integrate an IEEE 802.3af PoE-PD interface controller.
NCP1092: Controller, PoE-PD interface, integrated, with Vaux support
The NCP1090, NCP1091 and NCP1092 are members of ON Semiconductor's high power HIPO™ Power over Ethernet Powered Device (PoE-PD) product family and integrate an IEEE 802.3af PoE-PD interface controller.
NCP1093: IEEE802.3at PoE-PD interface controller
The NCP1093 and NCP1094 are members of ON Semiconductor's high power HIPO Power over Ethernet Powered Device (PoE-PD) product family and integrate an IEEE802.3at PoE-PD interface controller.
NCP1094: IEEE802.3at PoE-PD interface controller
The NCP1093 and NCP1094 are members of ON Semiconductor's high power HIPO Power over Ethernet Powered Device (PoE-PD) product family and integrate an IEEE802.3at PoE-PD interface controller.
Technical Documents
Quad MOSFET Approach Delivers Dramatic PoE Efficiency Improvements over Diode Bridge Alternatives
While wireless connectivity offers many significant benefits, it is not yet ready to completely replace hard-wired network connections. Wired connections can still provide a number of advantages − including reliability, security and the ability to transmit power through the network itself.
