feedback
评价本网页

需要帮助?

FUSB251GEVB: Type-C™ CC and SBU Protection IC Evaluation Board

The FUSB251 evaluation board is designed to be inserted between a board that contains a Type-C controller (such as FUSB302B or FUSB307B) and a source of voltage for OVP testing. Test points and header switches are ready to test OVP and moisture detection functions on CC and SBU. LED indicators will show power status and Interrupt. If there isn't access to a Type-C voltage source, test points (GND and VDD) are available on the board for direct power supply connections. The Type-C receptacle can accept a Type-C device such as Type-C charger or memory stick to demonstrate normal USB functionality.
特性和应用

特性

  • This product is general usage and suitable for many different applications.
  • Dead battery mode provides default Rd presenting on CC1/2
  • 24volt DC tolerant on CC and SBU
  • +/- 35volt Surge protection on CC and SBU
  • Over voltage protection on CC and SBU
  • I2C interface with Interrupt for event notification.
  • Moisture detection on CC and SBU pins.
  • On-chip IEC ESD protection with external capacitor on CAP pin
  • CC Ron 0.3ohm Typical
  • SBU Ron 3ohm Typical
  • 50Mhz Bandwidth on SBU switch
  • 15 ball WLCSP

应用

  • This product is general usage and suitable for many different applications.
评估/开发工具信息
产品 状况 Compliance 简短说明 所用产品 行动
FUSB251GEVB Active
Pb-free
Type-C™ CC and SBU Protection IC Evaluation Board FUSB251UCX
技术文档
类型 文档标题 文档编号/大小 修订号
Eval Board: Manual Type-C CC and SBU Protection IC Evaluation Board User's Manual EVBUM2637/D - 912 KB  0 
Eval Board: BOM FUSB251GEVB Bill of Materials (ROHS Compliant) FUSB251GEVB_BOM_ROHS - 135 KB  0 
Eval Board: Gerber FUSB251GEVB Gerber Layout Files (Zip Format) FUSB251GEVB_GERBER - 423 KB  0 
Eval Board: Schematic FUSB251GEVB Schematic FUSB251GEVB_SCHEMATIC - 204 KB  0 
Eval Board: Test Procedure FUSB251GEVB Test Procedure FUSB251GEVB_TEST_PROCEDURE - 224 KB  0 
Software FUSB251GEVB GUI Layout Files (Zip Format) FUSB251_GUI - 7996 KB  1 
Software FUSB251GEVB Firmware Layout Files (Zip Format) FUSB251_FIRMWARE - 23 KB  0 
Software FUSB251GEVB Reference Code (Zip Format) FUSB251GEVB_REFERENCE_CODE - 7 KB  1 
之前浏览的产品
清除列表

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.