feedback
评价本网页

需要帮助?

NCP380HSN05AGEVB:  High-Side Power Distribution Switch Evaluation Board

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 70 mΩ (DFN package), P channel MOSFET in a single package.

The device limits the output current to a desired level by switching into a regulation current-mode when the output load exceeds the current-limit threshold or a short is present. The current limit threshold is either user adjustable between 100mA and 2.1A via an external resistor or internally fixed.The power switch rise and fall times are controlled to minimize current ringing during switching.

An internal reverse-voltage detection comparator disables the power-switch if the output voltage is higher than the input voltage to protect devices on the input side of the switch. The /FLAG logic output asserts low during over current, reverse-voltage or over temperature conditions. The switch is controlled by a logic enable input active high or low.

评估/开发工具信息
产品 状况 Compliance 简短说明 所用产品 行动
NCP380HSN05AGEVB Active
Pb-free
High-Side Power Distribution Switch Evaluation Board NCP380HSN05AAT1G
技术文档
类型 文档标题 文档编号/大小 修订号
Eval Board: BOM NCP380HSN05AGEVB Bill of Materials ROHS Compliant NCP380HSN05AGEVB_BOM_ROHS.PDF - 74 KB  0 
Eval Board: Gerber NCP380HSN05AGEVB Gerber Layout Files (Zip Format) NCP380HSN05AGEVB_GERBER.ZIP - 109.0 KB  0 
Eval Board: Schematic NCP380HSN05AGEVB Schematic NCP380HSN05AGEVB_SCHEMATIC.PDF - 31.0 KB  0 
Eval Board: Test Procedure NCP380HSN05AGEVB Test Procedure NCP380HSN05AGEVB_TEST_PROCEDURE.PDF - 80 KB  0 
之前浏览的产品
清除列表

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.