LiDAR sensing is a trending solution for Industrial Automation and Control Systems because it is cost-effective, highly accurate, fast, and scalable. LiDAR sensing using SiPM (Silicon Photomultiplier) arrays enables object detection and avoidance, and movement and occupancy detection.
onsemi SiPM arrays feature an innovative fast mode that decreases sensing time. Our SiPM technology has industry-leading efficiency and dynamic range, enabling the sensors to work in a wide variety of environments, including direct sunlight.
onsemi offers LiDAR solutions alongside a wide range of LiDAR development platforms and tools supported by highly technical and experienced applications engineers to assist product development.
The RB-Series is a family of NIR-enhanced Silicon Photomultipliers (SiPM) for LiDAR and ranging applications using near-infrared illumination such as 905nm and 940nm.
The RDM SiPM 1x12 array is an automotive grade NIR-enhanced Silicon Photomultiplier (SiPM) array for LiDAR applications using near-infrared illumination such as 905nm and 940nm.
SiPM dToF LiDAR Platform
The Direct Time of Flight (dToF) SiPM LiDAR Platform is a single point range finder development kit for cost-optimized industrial and commercial applications.
This product allows users to quickly and easily set up an evaluation of the ArrayRDM-0112A20-QFN 1x12 element silicon photomultiplier (SiPM) array.
A Brief Introduction to Silicon Photomultiplier (SiPM) Sensors
The Silicon Photomultiplier (SiPM) is a low-light sensor that has performance characteristics comparable to a conventional PMT with the practical advantages of a solid-state sensor.
SiPMs in Direct ToF Ranging Applications
This white paper is intended to assist in the development of SiPM (Silicon Photomultiplier) based LiDAR (Light Detection and Ranging) systems.
Direct Time-of-Flight Depth Sensing Reference Designs
Depth sensing with precise measurements is a requirement for many applications in today’smarkets, including industrial, consumer, and automotive.
Biasing and Readout of onsemi SiPM Sensors
The SiPM consists of an array of microcells. Each microcell consists of a Single Photon Avalanche Diode (SPAD) and a quench resistor.
Performance Measurement and Model Validation of the onsemi Gen3 Scanning LiDAR Demonstrator
These sensors are now at the forefront of the most innovative developments for LiDAR applications in ADAS (Advanced Driver Assistance Systems) and autonomous vehicles.