feedback
评价本网页

需要帮助?

AMIS-41683: CAN 收发器,容错,3.3 V

Datasheet: Fault Tolerant CAN Transceivers (AMIS-41682 and AMIS-41683)
Rev. 9 (213kB)
产品概览
»查看材料成分
» 产品更改通知
新型 AMIS-41682 和 AMIS-41683 是控制局域网 (CAN) 中协议控制器和总线物理线路之间的接口。AMIS-41683 与 AMIS-41682 相同,只是具有一个真正的 CAN 控制器 3.3V 数字接口。该器件提供差分发射功能,但会在错误情况下切换到单线发射器或接收器。它最初用于客用车最高 125k 波特率的低速应用。AMIS-41682 和 AMIS-41683 均在 I2T100 工艺中实施,让高压模拟电路和数字功能能够共存于同一个芯片上。此类产品将安森美半导体的专业技术整合在车内多个收发器中,支持用于 0REMX-002-XTP (VAN)、AMIS-30660 和 AMIS-30663(CAN 高速)和 AMIS-30600 (LIN) 另一种广泛使用的物理层。
特性
 
  • Fully compatible with ISO11898-3 standard
  • Very low electromagnetic emission (EME)
  • Fully integrated receiver filters
  • Permanent monitoring of transmit data input
  • High electromagnetic susceptibility (EMS) in normal- and low-power modes
  • True 3.3V digital I/O interface to CAN controller
  • In the event of bus failure, automatic switching to single-wire mode
  • The device will automatically reset to differential mode if the bus failure
  • During failure modes there is full wake-up capability
  • Un-powered nodes do not disturb bus lines
  • Bus errors and thermal shutdown activation is flagged on ERRB pin
  • Short circuit proof to battery and ground
  • Thermal protection
  • The bus lines are protected against transients in an automotive environment
  • Support for low power modes
  • Low current sleep and standby mode
  • Power-on flag on the output
  • Two-edge sensitive wake-up input signal via pin WAKEB
应用   终端产品
  • In-Vehicle Networking
 
  • Automobiles
产品
状况
Compliance
具体说明
封装
MSL
容器
预算价格 (1千个数量的单价)
类型
外形
类型
Temperature
类型
数量
AMIS41683CANN1RG Lifetime
AEC Qualified
PPAP Capable
Pb-free
Halide free
AMIS-41683 SOIC-14 751AP 2 260 Tape and Reel 3000  
市场订货至交货的时间(周) : Contact Factory
外形
751AP   
AMIS-41683: CAN 收发器,容错,3.3 V
之前浏览的产品
清除列表

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.