feedback
评价本网页

需要帮助？

NCV7381: FlexRay® 收发器，箝位 30

Datasheet: FlexRay® Transceiver, Clamp 30
Rev. 4 (195kB)
产品概览
»查看材料成分
» 产品更改通知
NCV7381 是一款单沟道 FlexRay 收发器，符合 FlexRay Electrical Physical Layer Specification Rev. 3.0.1 规范，能够以高达 10 Mbit/s 的速率进行通信。它在一侧的有线 FlexRay 通信介质和另一侧的协议控制器和主机之间提供差分发射和接收功能。NCV7381 模式控制功能适用于永久性联接汽车电池的节点。它提供卓越的 EMC 和 ESD 性能。
特性
 
  • Compliant with FlexRay Electrical Physical Layer Specification
    Rev 3.0.1
  • FlexRay Transmitter and Receiver in Normal-power Modes for
    Communication up to 10 Mbit/s
  • Support of 60 ns Bit Time
  • FlexRay Low-power Mode Receiver for Remote Wakeup Detection
  • Excellent Electromagnetic Susceptibility (EMS) Level over Full
    Frequency Range. Very Low Electromagnetic Emissions (EME)
  • Bus Pins Protected against >10 kV System ESD Pulses
  • Safe Behavior under Missing Supply or No Supply Conditions
  • Interface Pins for a Protocol Controller and a Host
    (TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
  • INH Output for Control of External Regulators
  • Local Wakeup Pin WAKE
  • TxEN Time-out
  • BGE Feedback
  • Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:
    - VBAT Supply Parametrical Range from 5.5 V to 50 V
    - VCC Supply Parametrical Range from 4.75 V to 5.25 V
    - VIO Supply Parametrical Range from 2.3 V to 5.25 V
  • Compatible with 14 V and 28 V Systems
  • Operating Ambient Temperature -40C to +125C (TAMB_Class1)
  • Junction Temperature Monitoring with Two Levels
  • FlexRay Functional Classes
    - Bus Driver Voltage Regulator Control
    - Bus Driver Bus Guardian Interface
    - Bus Driver Logic Level Adaptation
    - Bus Driver Remote Wakeup
  • Automotive Qualification According to AECQ100
应用   终端产品
  • In Vehicle Networking
  • Powertrain
  • X-by-Wire
  • Safety
  
  • Automobiles
技术文档及设计资源
应用注释 (1) 封装图纸 (1)
数据表 (1) 评估板文档 (9)
评估/开发工具信息
产品 状况 Compliance 简短说明 行动
NCV7381A0V2GEVB Active
Pb-free
FlexRay ® Transceiver, Clamp 30 Evaluation Board
NCV7381AGEVK Active
Pb-free
FlexRay ® Transceiver, Clamp 30 Evaluation Kit
Availability & Samples
Specifications
外形
应用框图
Intaractive Block Diagram
产品
状况
Compliance
具体说明
封装
MSL
容器
预算价格 (1千个数量的单价）
类型
外形
类型
Temperature
类型
数量
NCV7381ADP0R2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
NCV7381 SSOP-16 565AE 2 260 Tape and Reel 2000 Contact Sales Office
市场订货至交货的时间(周) : Contact Factory

Product
Description
Pricing ($/Unit)
Compliance
Status
Data Transmission Standard
Data Rate
Number of Drivers
Number of Receivers
VCC Min (V)
VCC Max (V)
tPLH Max (µs)
IO Max (µA)
IIH Max (mA)
Package Type
NCV7381ADP0R2G  
 NCV7381 
Pb
A
H
P
 Active   
FlexRay
10 Mb/s
1
1
5.5
50
SSOP-16
外形
565AE   
封装
NCV7381: FlexRay® 收发器，箝位 30
NCV7381: FlexRay® 收发器，箝位 30
Application
Diagram - Block
Automotive
Door Module - Transceiver or SBC
Automotive
Micro Hybrid - Transceiver or SBC
Automotive
Engine Management System (Diesel) - Transceiver or SBC
Internet of Things (IoT)
IoT Edge Sensor Node - Communication Interface
Automotive
In-Vehicle Networking Gateway - Transceiver
Automotive
Instrument Cluster - Transceiver or SBC
Automotive
Front Lighting - Transceiver or SBC
Automotive
Rear Lighting - Transceiver or SBC
Automotive
Engine Management System (Gasoline) - Transceiver or SBC
Automotive
Traction Inverter - Communication
Automotive
Interior Lighting - Transceiver or SBC
Automotive
Electric Power Steering - Transceiver or SBC
之前浏览的产品
清除列表

Associated Products
Do you need a device with Connectivity to Clamp 15 ECUs? NCV7383

Your request has been submitted for approval.
Please allow 2-5 business days for a response.
You will receive an email when your request is approved.
Request for this document already exists and is waiting for approval.